Before Using The Appliance - Binatone RL-590 Instruction Manual

BEFORE USING
THE APPLIANCE
Charging the rechargeable
batteries of the lantern
Take the cable out of the cable storage com-
partment (9) and insert the plug into the AC
socket. The rechargeable battery condition in-
dicator of the red light (4) will come on indicating that the built-
in rechargeable battery started to charge.
You can use the electric network of a car to charge the lantern of
RL-595 model having the slot for 12 V (DC) power supply
connection.
Warning: charge the rechargeable batteries for 20-24 hours
before the first use. 24 hour charging of the batteries is
also needed after 4 hours of continuous work.
Note: recharge the batteries after each use and after long
(more than 3 months) period of storage. Otherwise
the rechargeable batteries may become unfit for use.
Note: always charge the batteries of the lantern, if light
is getting dim.
OPERATING INSTRUCTIONS
Using the appliance as the lantern
With electric network connection
Connect the cable to the electric network
and set the operation mode switch (5) to «AC». The recharge-
able battery condition indicator of the red light (4) will come
on indicating that the built-in rechargeable battery started to
charge.
You can switch the lantern on and off by pulling the rope
switch (7). When the RL-590 model is switched on, the indica-
tor of electric network connection of the green light (13) will
also come on.
Without electric network connection
Unplug the appliance from the power socket and set the op-
eration mode switch (5) to «AC» or «ON» . The lantern will
be powered by the charged battery.
You can switch the lantern on and off by pulling the rope
switch (7).
of steady light
6