Advertisement
Quick Links
GI JOE MORAY
Remove all pieces from plastic frames.
If you have difficulty, use safety scissors.
NOTE: Adult supervision may be required.
STRUTS
CONTROL BAR
1. Position control bar with handle as shown.
Snap struts onto control bar.
FRONT
HYDROFOIL
CONTROL BAR
HULL
3. Hold control bar handle. Lift front hydrofoil. Slide
control bar into hull, making sure control bar slides
under tabs. Fold hydrofoils into slots in hull.
STEERING WHEEL
SEAT
INTERIOR
5. Attach steering wheel and seats to interior. Place
assembled interior into vehicle as shown.
HYDROFOIL INSTRUCTIONS
™
FRONT
HYDROFOIL
REAR HYDROFOIL
2. Snap rear hydrofoil onto struts that are closest
to handle, as shown. Snap front hydrofoil onto
remaining struts.
LONG
HANDLE
MOUNT
4. With long mount in position shown, snap mount over
posts on front hydrofoil. Repeat with short mount
and rear hydrofoil. Slide handle back and forth to test
hydrofoils. NOTE: Put hydrofoils up before continuing.
DECK
SEAT
TABS
6. Insert tab on hull rear into hole in deck rear. Swing
deck down and snap tabs on hull into slots in deck.
HANDLE
SHORT
MOUNT
HANDLE
HOLE
TAB
Advertisement
Related Manuals for Hasbro GI Joe Moray 61238
Summary of Contents for Hasbro GI Joe Moray 61238
- Page 1 GI JOE MORAY ™ Remove all pieces from plastic frames. If you have difficulty, use safety scissors. NOTE: Adult supervision may be required. STRUTS FRONT HYDROFOIL CONTROL BAR 1. Position control bar with handle as shown. Snap struts onto control bar. FRONT HYDROFOIL HANDLE...
- Page 2 ACTUATOR BUTTON HOLE “T” TABS MISSILE BOX BOTTOM 7. Insert “T” tabs on missile box bottom into holes in 8. Insert actuator button into hole in deck. Insert missile missile box top. Slide “T” tabs toward rear of box. box lever into hole in actuator button. Swing missile Snap rear of missile box together.