Speedometer Unit; High Beam Indicator Light - Yamaha SXV70H Owner's Manual

ESU00291

Speedometer unit

The speedometer unit is equipped with the following:
G a digital speedometer (which shows riding speed)
G an odometer (which shows the total distance trav-
eled)
G
two tripmeters (which show the distance traveled
since they were last set to zero)
G warning indicators (which show self-diagnosis, cool-
ant temperature, oil level, and fuel level warnings)
G fuel meter (which shows the fuel remaining in the fuel
tank)
After the engine is started, the tachometer 1 makes one
sweep, and the warning light 2 and all segments of the
meter 3 turn on and off once, then the warning light
turns on again, and then goes off if there are no prob-
lems.
Odometer and tripmeter modes
Pushing the select/reset button 4 switches the display
between the odometer mode "ODO" and the tripmeter
modes "TRIP A" and "TRIP B" in the following order:
ODO → TRIP A → TRIP B → ODO
To reset a tripmeter, push the select/reset button for at
least one second while the tripmeter is displayed.
NOTE:
@
To switch the speedometer, odometer, and tripmeter dis-
plays between kilometers and miles, select the odometer
mode "ODO", and then push the select/reset button 4
for at least 10 seconds.
@
ESU00298

High beam indicator light

The high beam indicator light 1 comes on when the high
beam of the headlight is switched on.
5-4