Speedometer Unit - Yamaha RX10RX Owner's Manual

Control functions
1. Warning light "/jj\"
2. Self-diagnosis warning indicator "CSi"
3. Two-digit code "84"
ESU10361
Speedometer unit
The speedometer unit is equipped with the
following:
• a digital speedometer (which shows the
riding speed)
• an odometer (which shows the total dis-
tance traveled)
• two tripmeters (which show the distance
traveled since they were last set to zero)
• a barometer (which shows the ambient
barometric pressure)
• a clock
• warning indicators (which show self-diag-
nosis, coolant temperature, fuel level, and
oil level warnings)
• a fuel meter (which shows the fuel remain-
ing in the fuel tank)
• a grip/thumb warmer level indicator (which
shows the grip warmer level or the thumb
warmer level)
• a display brightness control function
After the engine is started, the tachometer
makes one sweep, and the low coolant tem-
perature indicator light, the warning light, and
all segments of the meter display turn on and
off once.
1. Tachometer
2. Low coolant temperature indicator light
3. Warning light "/K"
4. Meter display
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
Odometer, tripmeter, and barometer
modes
Pushing the "SELECT" button switches the
display between the odometer mode "ODO",
tripmeter modes "TRIP A" and "TRIP B", and
barometer mode "BARO".
1. "SELECT" button
To reset a tripmeter, push the "RESET" button
for at least 1 second while the tripmeter is dis-
played.
NOTE:
• To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode "ODO",
12