Yamaha GRIZZLY 660 Owner's Manual page 113

NOTE:
Skip steps 6–10 if the oil filter cartridge is not being
replaced.
6. Remove panels D and E. (See page 8-9.)
7. Remove the oil filter cartridge with an oil filter
wrench.
1. Oil filter cartridge
2. Oil filter wrench
NOTE:
An oil filter wrench is available at a nearby Yamaha
dealer.
8. Apply a thin coat of engine oil to the O-ring of
the new oil filter cartridge.
1. O-ring
NOTE:
Make sure that the O-ring is properly seated.
9. Install the new oil filter cartridge with an oil fil-
ter wrench, and then tighten it to the specified
torque with a torque wrench.
8-20
8