Black & Decker CTO6305C Use And Care Book Manual page 6

COnVeCtiOn COOking FunCtiOn
The ConveCTIon function uses an internal fan to distribute heat evenly. You can only
use this feature with the BAke function.
1. To turn on the fan for convection cooking:
• After you have selected the desired temperature and time,
press StArt/StOP button then press the Conv
will hear the fan running and the digital display shows the fan
symbol throughout the cooking cycle (L).
• When baking using convection, the temperature selected should
be 25˚F (10 ˚C) lower than recommended temperature for
conventional cooking.
• Watch cooking time as some foods will bake faster.
L
quiCk BAke FunCtiOnS
These functions allow you to cook certain foods at preset cooking temperatures and
times, or can be adjusted as desired.
note: You can stop the cooking at any time by pressing the StArt/StOP button.
COOkieS FunCtiOn (m)
Preset temperature: 350˚F (180 ˚C).
Preset time: 12 minutes
rack Position: 2 or 3 (refer to Figure D). Place in the center of
the oven.
1. Press COOkieS
2. To change the temperature, immediately press ▲ or ▼ buttons.
Tap button and release to change in increments of 5 degrees.
Press and hold button to change in increments of 25 degrees.
3. To change the time, press the time
release to change in one-minute increments. Press and hold
button to change in 10-minute increments.
4. Press StArt/StOP button.
• digital display flashes lo and PReHeAT until 150˚F
temperature is reached. Then it flashes temperature and
PReHeAT until the set temperature is reached.
• once unit reaches set temperature, it beeps and the display
m
alternates between temperature and time during the entire
cooking cycle.
0
button. You
button.
button. Tap button and
• The time will count down in one-minute increments until it reaches 59 seconds,
then it counts down in one-second increments.
• At the end of the cooking cycle, the unit beeps 3 times and cooking stops.
5. open oven door using oven mitt or pot holder and carefully remove food.
PizzA FunCtiOn (n)
Preset temperature: 400˚F (204 ˚C)
Preset time: 20 minutes
rack Position: 2 or 3 (refer to Figure D)
1. Press PizzA
2. To change the temperature, immediately press ▲ or ▼
buttons. Tap button and release to change in increments of 5
degrees. Press and hold button to change in increments of 25
degrees.
3. To change the time, press the time
and release to change in one-minute increments. Press and hold
button to change in 10-minute increments.
4. Press StArt/StOP button.
• digital display flashes lo and PReHeAT until 150˚F
temperature is reached. Then it flashes temperature and
PReHeAT until the set temperature is reached.
• once unit reaches set temperature, it beeps and the display
n
alternates between temperature and time during the entire
cooking cycle.
• The time will count down in one-minute increments until it reaches 59 seconds,
then it counts down in one-second increments.
• At the end of the cooking cycle, the unit beeps 3 times and cooking stops.
5. open oven door using oven mitt or pot holder and carefully remove food.
FrOzen SnACkS FunCtiOn (P)
Preset temperature: 400˚F (204 ˚C)
Preset time: 6 minutes
rack Position: 2 or 3 (refer to Figure D)
1. Press FrOzen SnACkS
2. To change the temperature, immediately press ▲ or ▼
buttons. Tap button and release to change in increments of
5 degrees. Press and hold button to change in increments of
25 degrees.
3. To change the time, press the time
and release to change in one-minute increments. Press and
hold button to change in 10-minute increments.
4. Press StArt/StOP button.
• digital display flashes lo and PReHeAT until 150˚F
temperature is reached. Then it flashes temperature and
PReHeAT until the set temperature is reached.
P
button.
button. Tap button
button.
button. Tap button