Adjusting The Rear Brake Light Switch - Yamaha Ultramatic GRIZZLY 660 Owner's Manual

WARNING
POTENTIAL HAZARD
Operating with improperly serviced or
adjusted brakes.
WHAT CAN HAPPEN
You could lose braking ability, which
could lead to an accident.
HOW TO AVOID THE HAZARD
After servicing:
Make sure the
G
smoothly and that the free play is cor-
rect.
G Make sure the brakes do not drag.
G All air must be bled from the brake
system.
Replacement of brake components re-
quires professional knowledge. These
procedures should be performed by a
Yamaha dealer.
brakes operate
EBU00834

Adjusting the rear brake light switch

The rear brake light switch, which is activated
by the brake pedal and brake levers, is prop-
erly adjusted when the brake light comes on
just before braking takes effect. If necessary,
adjust the brake light switch as follows.
Turn the adjusting nut while holding the rear
brake light switch in place. To make the brake
light come on earlier, turn the adjusting nut in
direction a. To make the brake light come on
later, turn the adjusting nut in direction b.
1. Rear brake light switch
8-42
2. Adjusting nut