Checking And Lubricating The Cables; Checking And Lubricating The Front And Rear Brake Levers - Yamaha GRIZZLY 350 Owner's Manual

2. Turn the adjusting nut while holding the brake
light switch in place. To make the brake light
come on earlier, turn the adjusting nut in direc-
tion (a). To make the brake light come on lat-
er, turn the adjusting nut in direction (b).
8
1. Brake light switch
2. Brake light switch adjusting nut
3. Install the panel.
EBU24890

Checking and lubricating the cables

The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.
Recommended lubricant:
Engine oil
EWB02120
POTENTIAL HAZARD
Damaged control cables.
WHAT CAN HAPPEN
Corrosion can result when the cable sheaths
become damaged, and cables can also be-
come frayed or kinked, which could restrict
the operation of controls and lead to an acci-
dent or injury.
HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace damaged
cables.
EBU24911
Checking and lubricating the front and
rear brake levers
The operation of the front and rear brake levers
should be checked before each ride, and the lever
pivots should be lubricated if necessary.
8-32
WARNING