Parking Brake Adjustment - Yamaha BLASTER YFS200V Owner's Manual

Hide thumbs Also See for BLASTER YFS200V:
Table of Contents

Advertisement

EBU01193

Parking brake adjustment

Parking brake adjustment may be required if the
parking brake does not hold properly. The cable
length "A" should be adjusted to 64–68 mm
(2.52–2.68 in).
A. Cable length
1. Fully loosen the locknut and the adjusting
bolt at the clutch lever.
1. Locknut
A
8-28
2. Loosen the locknut and the adjusting bolt
at the rear brake caliper.
3. Turn the adjusting bolt at the clutch lever in
direction a to increase the cable length or
in direction b to decrease the cable length.
1 2
a
b
2. Adjusting bolt

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents