Fuel - Yamaha VMAX VMX12R Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
To install the fuel tank cap
1. Insert the fuel tank cap into the
tank opening with the key inserted
in the lock and with the mark on
the cap facing forward.
2. Turn the key counterclockwise to
the original position, and then re-
move it.
3
3. Slide the rider seat backrest rear-
ward and push it down.
NOTE:
_
The fuel tank cap cannot be installed
unless the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly installed and locked.
_
WARNING
_
Make sure that the fuel tank cap is
properly installed before riding.
_
1. Fuel tank filler tube
2. Fuel level

Fuel

Make sure that there is sufficient fuel in
the tank. Fill the fuel tank to the bottom
of the filler tube as shown.
EW000024
WARNING
_
G
Do not overfill the fuel tank, oth-
erwise it may overflow when the
fuel warms up and expands.
G Avoid spilling fuel on the hot
engine.
_
CAUTION:
@
Immediately wipe off spilled fuel
with a clean, dry, soft cloth, since
fuel may deteriorate painted surfac-
es or plastic parts.
@
Recommended fuel:
Fuel tank capacity:
EAU03753
EW000130
CAUTION:
_
Use only unleaded gasoline. The
use of leaded gasoline will cause se-
vere damage to internal engine
parts, such as the valves and piston
rings, as well as to the exhaust sys-
tem.
_
3-7
UNLEADED GASOLINE ONLY
Total amount:
15 L (3.3 Imp gal, 4.0 US gal)
Reserve amount:
3 L (0.7 Imp gal, 0.8 US gal)
EAU00185
EAU04265
ECA00104