Spark Plug Inspection - Yamaha BLASTER YFS200S Owner's Manual

cC
8 In order to prevent clutch slippage (since
the transmission oil also lubricates the
clutch), do not mix any chemical additives.
Do not use oils with a diesel specification
of "CD" or oils of a higher quality than
specified. In addition, do not use oils
labeled "ENERGY CONSERVING II" or
higher.
8 Make sure that no foreign material enters
the crankcase.
7. Start the engine and warm it up for a few
minutes. While warming up, check for oil
leakage. If oil leakage is found, stop the
engine immediately, and check for the
cause.
8. Check the oil level.
EBU00680

Spark plug inspection

Removal
1. Remove the spark plug cap.
1
1. Spark plug cap
2. Use the spark plug wrench in the tool kit to
remove the spark plug as shown.
8-8