Yamaha 2A Owner's Manual page 97

3
5
5
208021
208023
3/5
Procedure
1) Remove the top cowling.
2) Remove the starter by removing the
bolts.
5
3) Disconnect the start-in-gear protec-
tion cable from the starter.
4) Prepare the engine for starting. See
STARTING ENGINE for procedures.
Be sure the engine is in Neutral.
5) To start the engine with emergency
starter rope, insert the knotted end of
the rope into the notch in the fly-
wheel rotor and wind the rope sever-
al turns clockwise. Then, give a
strong pull straight out to crank the
engine. Repeat if necessary.
5-8
E