Adjusting The Rear Brake Lock Lever Cable; Checking The Front And Rear Brake; Pads - Yamaha MAJESTY 400 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Adjusting the rear brake lock
lever cable
1
2
1
2
(b)
3
(a)
4
1. Adjusting nut
5
2. Rear brake lock lever cable length
Rear brake lock lever cable adjustment
6
may be required if the rear brake lock le-
ver does not hold properly. When the
7
rear brake lock lever is not in use, the
rear brake lock lever cable length should
measure 45 mm to 47 mm (1.77 in to
8
1.85 in) at the rear brake caliper. Period-
ically check the rear brake lock lever ca-
9
ble length and, if necessary, adjust it as
follows.
To increase the rear brake lock lever
cable length, turn the adjusting nut at
the rear brake caliper in direction (a).
EAU33473
To decrease the rear brake lock lever
cable length, turn the adjusting nut in
direction (b).
WARNING
If proper adjustment cannot be ob-
tained as described, have a Yamaha
dealer make this adjustment.
6-27
Checking the front and rear
brake pads
The front and rear brake pads must be
checked for wear at the intervals spec-
EWA10650
ified in the periodic maintenance and
lubrication chart.
Front brake pads
1
1. Wear indicator groove
Each front brake pad is provided with a
wear indicator groove, which allows
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator groove. If a brake
pad has worn to the point that the wear
EAU22390
EAU22420