Yamaha YZF-R6 Owner's Manual page 34

1. Spring preload adjusting ring
2. Special wrench
3. Position indicator
Adjusting spring preload
Turn the adjusting ring in direction a to in-
crease spring preload and in direction b
to decrease spring preload.
Make sure that the appropriate notch in
the adjusting ring is aligned with the po-
sition indicator on the rear shock ab-
sorber.
CI-18E
Stan-
Hard
dard
Adjusting
9 8 7 6 5
position
INSTRUMENT AND CONTROL FUNCTIONS
1. Rebound damping force adjusting knob
Adjusting rebound damping force
Turn the adjusting knob in direction a
to increase rebound damping force and
in direction b to decrease rebound
damping force.
CI-34E
Minimum (soft)
Standard
Maximum (hard)
* From the fully turned-in position
Soft
4 3 2 1
1. Compression damping force adjusting screw
Adjusting compression damping
force
Turn the adjusting screw in direction a
to increase compression damping
force and in direction b to decrease
compression damping force.
25 clicks out*
CI-34E
9 clicks out*
Minimum (soft)
1 click out*
Maximum (hard)
* From the fully turned-in position
3-20
13 clicks out*
Standard 7 clicks out*
1 click out*
3