Replacing The Headlight Bulb - Yamaha YZF-R6 Owner's Manual

Hide thumbs Also See for YZF-R6:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
CAUTION:
@
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
@
3. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
6
EC000103
1. Headlight coupler
2. Headlight bulb cover

Replacing the headlight bulb

This motorcycle is equipped with a
quartz bulb headlight. If the headlight
bulb burns out, replace it as follows.
1. Remove panel C. (See page 6-8
for panel removal and installation
procedures.)
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
6-39
1. Headlight bulb holder
3. Unhook the headlight bulb holder,
EAU01822
and then remove the defective
bulb.
WARNING
@
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
@
4. Place a new bulb into position, and
then secure it with the bulb holder.
EW000119

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents