PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
2
1
3
1. Pinch bolt
4
2. Wheel axle
2. Loosen the pinch bolt and
5
wheel axle.
3. Elevate the front wheel by
placing a suitable stand under
6
the engine.
4. Remove the wheel axle and
7
the front wheel.
8
NOTE:
Do not depress the brake lever
9
when the disc and caliper are sepa-
rated.
Front wheel installation
1. Install the speedometer gear
unit into the wheel hub. Make
sure the wheel hub and the
speedometer gear unit hous-
ing are installed with the pro-
jections meshed into the slots.
2. Lift up the wheel between the
front fork legs and guide the
brake disc between the brake
pads.
Make
sure
enough gap between the brake
pads before inserting the brake
disc.
6-37
EAU01547
3. Make sure the slot in the
speedometer gear unit fits
over the stopper on the front
fork outer tube.
4. Install the wheel axle and let
the motorcycle down.
there
is