1. Quick fastener (× 3)
2. Mudguard
4. Remove the mudguard by remov-
ing each quick fastener.
INSTRUMENT AND CONTROL FUNCTIONS
1. Position indicator
2. Spring preload adjusting ring
3. Special wrench
5. To increase the spring preload
and thereby harden the suspen-
sion, turn the adjusting ring in di-
rection a. To decrease the spring
preload and thereby soften the
suspension, turn the adjusting ring
in direction b.
NOTE:
_
G
Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.
G
Use the special wrench included in
the owner's tool kit to make the
adjustment.
_
3-14
CI-10E
Minimum (soft)
Standard
Maximum (hard)
6. Install the mudguard and ignitor
unit panel by installing the quick
fasteners.
Setting
1
4
9
3