Page 1
User's Guide 1200 XYRON ® The Xyron 850 / Xyron 1200 is designed to be used with one of Important Notice : the following replacement cartridges: Your Xyron 850 / Xyron 1200 system is designed to permanently attach a clear film or adhesive to the front and/or back of any SL/DL: Double- and single sided lamination.
Page 2
Setting Up Remove the Xyron System and Document Feed Tray from the packaging. The System is shipped with a sample supply cartridge already installed. Install the feed tray by inserting it horizontally into the cartridge opening by the grooves in the left and right dispenser side plates as shown below.
Page 3
Cartridge Replacement Remove feed tray by Remove used supply cartridge by lifting upward and pulling outward. If gently pulling there is film away from between the dispenser. rollers, turn handle counter-clockwise. To Install New Cartridges To Install Part-used Cartridges Position cartridge leader Attach reusable cartridge between the rubber rollers in starter tool to partially...