Table of Contents Getting started Safety notes ........................5 Features ........................6 Package contents ......................8 Names of the parts ......................9 Using the player (Basic Operations) Turning the power on/off ....................11 Selecting folder ......................12 Voice recording (VR selection) ..................13 Playing back file ......................14 Using the player (Additional Operations) Setting the A-B repeat ....................15 Deleting file ........................16...
Page 3
Listening to FM radio ....................32 • Tuning and saving the station frequency ............32 • Listening to radio with saved frequency ............34 • Deleting saved frequency ................35 • Recording while listening to FM radio..............36 • Setting the FM radio reception area ..............37 Connecting to external devices ..................38 •...
WARRANTY CONDITIONS VIETA AUDIO S.A. guarantees its products for a period of one (1) year. This warranty covers possible defects in material or workmanship for all VIETA products sold within Spanish Territory by authorized distributors. VIETA products sold in other countries will be covered by the warranty offered by the local distributor.
Safety notes Read this manual completely before using this product. • Keep away from the reach of infants and children. Batteries are dangerous to them. If anyone swallows the battery, consult with doctor immediately. • Do not short, disassemble, heat, apply pressure or throw into fire. It can cause electrolyte leakage, overheat, breakdown or fire.
Features Digital music playback Plays back the MP3 and WMA type digital music.(For WMA file playback, bit rate of 64Kbps or m ore is available.) FM radio reception and recording Available to listen to FM radio and record the FM broadcasting. Digital interface (USB) Saves the recorded files in PC and plays back in media player or sends email (including attachment with motion picture).
Page 7
Continuous recording Up to 35 hours (128MB) can be recorded. Free memory display The player will figure out the memory in use as well as the remaining amount. Resume function The last played back point will be saved even though the power is turned off. Easy-to-use operation button Easy-to-use basic buttons such as the PLAY, REC or STOP as well as other functional buttons such as DELETE or FOLDER are exposed to external side.
Package contents Voice Recorder Earphone USB connection User's Manual Two Batteries Antenna cable (AAA) Optional Installation CD Neck External device Phone connection External strap connection cable cord/adaptor microphone • If these accessories are damaged or broken, you can get them from the Service Center. •...
Names of the parts Front Rear Internal microphone REC/STOP button LCD display Recording: Red Playing back: Green, red or orange Listening to FM radio: Green, red, orange Display Battery cover Built-In Speaker Left Right Line in terminal Jog/Fast search button. Earphone output terminal HOLD (lock) switch PLAY/STOP button...
LCD display Operation of Internal Speaker Playback Level Resume on/off Folder Sensitivity of Microphone Repeat Status Remaining Battery FM RADIO/VOICE/MP3 Amount Function Mode Equalizer Mode Playback Time Bit rate Track Number Title (Title of a track and musician) Inserting battery Check the remaining battery amount Enough Little used...
Turning the power on/off To turn the power on Press the REC/STOP button longer than a second to turn the power on. To turn the power off Turning off automatically: If you don’t use the play longer than 1 minute in the Stop mode, the power will be turned off automatically.
Selecting folder You can select a folder to playback in the VR or FM Radio mode. Press the Folder selection button (A.B/FOLDER) button in the Stop mode. To control the volume level You can control the volume level from 0 to 30 in the Stop or Playback mode. Press the “+”...
Voice recording (VR selection) Push the switch to the VR direction and then can record sound source by pressing the REC/STOP button while the power is turned on. • Make the integrated microphone to face towards the sound source when recording. Press the REC/STOP button.
Playing back file Press the PLAY/STOP button to turn on the power and select the mode – MP3 or VR. • In the VR mode, select the folder containing the file to playback by pressing the folder selection button (A.B/FOLDER). Whenever you press the button, the folder will be changed by the order of A, B, C and D.
Setting the A-B repeat Press the A-B repeat (A.B/FOLDER) button at the point where you want to start A-B repeat playback during playback. • The will be set. Press the A-B repeat (A.B/FOLDER) button again at the point where you want to finish A-B repeat playback during playback.
Deleting file To delete one music or voice file Press the REC/STOP button to turn on the power and select the mode – MP3 or VR. • In the VR mode, select the folder containing the file to playback by pressing the folder selection button (A.B/FOLDER).
Page 17
To delete all files in the folder Select the VR mode and press the folder selection button (A.B/FOLDER) to select the folder containing the file to delete. • Whenever you press the "A.B/FOLDER" button, the folder will be changed by the order of A, B, C and D.
Page 18
To delete entire music or voice files Select the MP3 or VR file and press the MENU button. • Select the Erase using REW/FF button. Select the “ALL" using the REW/FF button and press the MENU button. • If you select the “ALL” in the VR mode, all recording files in A/B/C/D will be deleted. Select the “ALL”...
Deleting all files in the player Press the MENU button, select the Erase using REW/FF button and press the MENU button. Select the “FORMAT” using the REW/FF button and press the MENU button. • The Erasing all files menu will appear. Select the “FORMAT YES”...
Setting the Intro scan Press the PLAY/STOP button longer than 2 seconds while playing back MP3 or VR files. • Starting from the current file, the intro section of all files will be played back for 7 seconds, and the mode will be released and the initial state will be resumed.
Setting menu (when the MP3 is selected) Press the PLAY/STOP button to turn on the power and select the MP3 mode. After pressing the MENU button in the Playback or Stop mode, move to the intended function using the REW/FF button. •...
Setting My Option (when the MP3 is selected) Setting the EQ mode After pressing the MENU button in the Playback or Stop mode, select the EQ Mode using the REW/FF button. • The player will enter the Sound setting mode. Select the tone you want using the REW/FF button.
Setting the Repetition You can playback the selected file once or repeatedly. Press the MENU button in the Playback or Stop mode and select the REPEAT using the REW/FF button. Select the repetition type you want using the REW/FF button. No repetition.
Setting the LCD light After pressing the MENU button in the Playback or Stop mode, select the LCD light using the REW/FF button. Select the time you want using the REW/FF button. • You can set the flashing time of the LCD light by 7 steps (2 – 7 seconds) after button manipulation.
Setting the display You can check file name, playback time or remaining playback time (or available recording time), depending on the settings. After pressing the MENU button in the Playback or Stop mode, select the Display using the REW/FF button. Select information you want using the REW/FF button.
Setting the Resume function If you stop playback by pressing the REC/STOP button during playback and start playback again, the playback will be resumed from the last played position. After pressing the MENU button in the Playback or Stop mode, select the RESUME using the REW/FF button.
Setting the Hearing Aid You can listen to natural sound more clearly with earphone at the STAND-BY mode. After pressing the MENU button in the Playback or Stop mode, select the Hearing aid using the REW/FF button then pressing the MENU button. Select the On or Off mode using the REW/FF button.
Setting the Microphone sensitivity You can set the Microphone sensitivity base on your environmental situation, such as the distance of sound source to microphone and noisy level. After pressing the MENU button in the Playback or Stop mode, select the MIC SENSE using the REW/FF button then pressing the MENU button.
Checking the memory You can check the available memory in the Playback or Stop mode. After pressing the MENU button in the Playback or Stop mode, check the available free memory using the REW/FF button. Press the MENU button again to see the remaining memory compared with the total memory.
Setting menu (when the recording folder is selected) Select the VR mode while the power is turned on by pressing the REC/STOP button. Press the folder button to select the fonder that will save the file to record among A, B, C or D.
Setting My Option (when the recording folder is selected) Setting the REC mode You can select the recording quality – HQ, SQ or LQ. You can also set the recording time depending on the recording quality. After pressing the MENU button in the Playback or Stop mode, select the REC MODE using the REW/FF button.
Listening to FM radio Push REC/STOP button to the FM direction while the power is turned on. If you select the FM Radio mode, the frequency of last selected will be set automatically. Tuning and saving the station frequency To tune and save the station manually Press the MENU button.
Page 33
To set and save the station automatically Only the identifiable frequency will beset in the area that receives weak frequency. Press the MENU button. • The player will enter the Radio mode. Press the MENU button again to select the “AUTO SAVE MODE" using the REW/FF button and press the MENU button.
Listening to radio with saved frequency Press the MENU button. • The player will enter the Radio mode. Press the MENU button again to select the “PRESET MODE " using the REW/FF button and press the MENU button. • The manual frequency channel setting mode will be selected Pull the REW/FF button shortly and find the saved channel.
Deleting saved frequency Deleting one Frequency channel Press the MENU Button and press the MENU button again to select the “CH_ERASE MODE” using the REW/FF button. • The “CH ERASE MODE” will be selected. Pull the REW/FF button shortly and find the saved preset channels.
Recording while listening to FM radio Press the REC/STOP button. The red lamp will flash and the saved folder and number will be displayed. Then, the recording will be started. • If you press the Folder button before recording, the recording folder will be selected and saved in the file next to the recorded file.
Setting the FM radio reception area Press the MENU button and pull the FF button once to select the “AREA MODE”. Then, press the MENU button gain. • The player will enter the Area setting mode. Select the reception area using the REW/FF button and set the area by pressing the MENU button.
Connecting to external devices Recording by connecting to audio You can save the outputs from the external devices as the EVR type or records the file saved in the MP3 player in external devices. Connect the microphone input terminal of the MP3 player to the output terminal of the external device using the external device connection cable.
Recording the recorded contents to audio Connect the microphone output terminal of the MP3 player to the input terminal of the external device using the external device connection cable Select a file to record in the external device. Press the PLAY/STOP button of the MP3 player and the REC button of the external device at the same time.
Connecting to your PC To connect the player to your PC To install the X-ONE Manager You can upload the file saved in the player to the PC, or download the file saved in the PC to the player. System requirements Computer: Pentium or faster CPU on the IBM compatible PC with USB port support.
Page 41
Press the [Next] button in each window that appears sequentially. When the installation is completed, the shortcut icon ( ) will be appeared on the desktop window. Note: •To uninstall the X-ONE Manger, select [Start] [Settings] [Control Panel] [Add/Remove Program] or select [Start] [Programs] [X-ONE] [X-ONE...
Page 42
To install the driver on Windows 98/SE/ME/2000 The driver will be automatically installed when you connect the player to the PC after installing the X-ONE Manager. If the PC cannot recognize the player, the “New Hardware Installation Wizard” message will appear. In this case, take the following steps. Press the [Next] button in each window that appears sequentially.
Page 43
Click the 'Browse’ and specify the path as follows. C:\Program Flles\X-one\X-ONE Manager\Driver Then, click ‘Next’.
Page 44
To install the driver on Windows XP If you install the X-ONE Manager and connect the product to your PC, the "New Hardware Installation Wizard" window is displayed. Press the [Next] button in each window that appears sequentially.
Using the X-ONE window and icon Double-click the X-ONE shortcut icon on the desktop window while the USB is connected to run the X-ONE program. Main window Play list sync icon ID3 tag edit icon Mail program icon Player program icon Information icon Folder sync icon Explorer...
Page 47
Icon Folder Sync: Downloads all files on one folder in PC to the player. Play List Sync: Downloads the list saved in the play list file to the player. ID3 Tag Edit: Adds or modifies the ID3 tags in the MP3 file. Mail program: Runs the program that is provided by the mail service for the recorded file and media file.
Uploading file 4. The selected files will be uploaded to PC. • To rename the file, click the right mouse button and input new name. 3. Click the Upload icon. 2. Select the player file 1. Select the player folder. Note: •...
Downloading file 1. Select a folder in PC. 2. Select the file in PC. 3. Click the Download icon. 4. The selected file will be downloaded to the player Note: •Do not disconnect the USB cable from PC while upload or download process is running. It may cause critical damages to your PC and the product.
Searching for the PC Help 1. Click Help button twice to display information on the PC application. 2. Click Help to display information on the PC application.
Check points before Inquiry Check Points1 Isn't the battery empty? Replace with new one. The LCD display is off. Check Points2 Are the battery polarities correct? Check the battery polarities. Fails to record. Check Points1 Is the player locked? Release the HOLD button. Check Points2 Is the recording number or memory Remove the unnecessary space full?
Product Specifications Model Name DM-FA30 File Format MP3 and WMA (For WMA file playback, bit rate of 64Kbps or more is available.) Recording Time Up to 35 hours 128MB Up to 72 hours 256MB Dimensions 102.5(H) . 27(W) . 17.5(D)mm Weight 41.5g (excluding the battery) Power Supply...
Page 54
FCC note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.