Using Regza-Link - Toshiba 32RV600E Owner's Manual

Using REGZA-LINK

This feature uses CEC (Consumer Electronics
Controls) technology and allows the control of
Toshiba REGZA-LINK compatible devices from
the TV remote control via HDMI connection
(- page 34).
Note:
Not all Toshiba products currently support
REGZA-LINK.
REGZA-LINK one touch play
When a connected device is turn on REGZA-
LINK will automatically detect the TV through the
input selection. If the TV is in standby it will be
turn on automatically. This feature is selected in
the REGZA-LINK setup menu.
Note:
Even if the device is showing a menu the TV
may automatically show the video input source
on-screen display.
REGZA-LINK system standby
This feature automatically turns the connected
device into standby when the TV goes into
standby and conversely for the TV to switch
into standby when connected device goes into
standby.
REGZA-LINK system audio control
Using the Speaker preference feature allows the
TV remote control to adjust the volume or mute
the sound of the speakers connected to the TV
via an AV amplifi er.
Ensure that the connected AV amplifi er and
REGZA-LINK device are selected in the input
source selection and that the Speaker is set to
Amplifi er in the Quick Menu.
26
Using the TV's features
Notes:
• When you turn on the AV amplifi er, change its
input source, or adjust the sound volume, the
sound will be output from the AV amplifi er's
speakers even if TV Speakers has been
selected for Speaker Preference in the
REGZA-LINK menu. Turn the TV fi rst to
standby and on again to output the sound from
the TV's speaker.
• The proper function may not work by operating
AV amplifi er.
• In this mode, the PIP function (- page 25) is
not available.
• The above functions are dependent on the
connected device and TV setting.
REGZA-LINK functions
When the Enable REGZA-LINK is set to On, it
allows the following functions to be enabled by
setting them to On.
• TV Auto Power
If a REGZA-LINK device is turned on or off, the
TV turns on or standby automatically.
• Auto Standby
If the TV is set to standby, the TV will send a
message to turn off the selected REGZA-LINK
device connected to the TV.
• Speaker preference
From this item, you can set your audio output
preference to the TV speakers or the AV
amplifi er speakers. When this item is set to
Amplifi er, the TV remote control can be used
to adjust or mute the volume of the audio. This
item will be greyed out unless a REGZA-LINK
compatible AV amplifi er is connected. This
feature can be operated from the Speaker in
the Quick Menu.
Notes:
• When you turn on the AV amplifi er, change its
input source, or adjust the sound volume, the
sound will be output from the AV amplifi er's
speakers even if TV Speakers has been
selected for Speaker Preference in the
REGZA-LINK menu. Turn the TV to standby
and on again to output the sound from the TV's
speakers.
• The above functions are dependent on the
connected device and TV setting.