Toshiba Portege R200 User Manual page 118

3. Use the left/right cursor keys to highlight the boot device you want and
press Enter.
■
If a supervisor password is set only it is the following.
■
■
■
If the supervisor and user password are set, it is the following.
■
■
■
■
The selection method above does not change the boot priority settings
in HW Setup.
■
If you press a key other than one of those above or if the selected
device is not installed, the system will boot according to the current
setting in HW Setup.
HDD Priority Options
Set the priority of the HDD as a startup device.
Built-in HDD ->
USB (Default)
USB -> Built-in
HDD
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
Enabled
Disabled
PORTÉGÉ R200
The menu above appear (able to run HW Setup).
The menu above does not appear (unable to run HW Setup).
The menu above appears when you use the supervisor and user
password to start the computer (able to run HW Setup).
The menu above does not appears when you use the user
password to start the computer (unable to run HW Setup).
The menu above appears when you use the supervisor password
to start the computer (unable to run HW Setup).
The priority is set as built-in HDD -> USB
memory.
The priority is set as USB memory -> built-in
HDD.
Enables the Wake-up on Keyboard.
Disables the Wake-up on Keyboard (Default).
HW Setup
7-4