Toshiba L10 Series User Manual page 33

Instant Security
Display Automatic
Power Off
HDD Automatic
Power Off
System Automatic
Standby/Hibernation
Intelligent Power
Supply
Battery Save Mode
User's Manual
The hot key function Fn + F1 blanks the screen
and disables the computer, providing data
security.
This feature automatically cuts off power to the
internal display when there is no keyboard input
for a time specified. Power is restored when any
key is pressed. To specify the time click start,
Control Panel, Performance and
Maintenance, Power Options. At Power
Schemes tab, you can select the time for Turn
off monitor.
This feature automatically cuts off power to the
hard disk drive when it is not accessed for a time
specified. Power is restored when the hard disk
is accessed. To specify the time, click start,
Control Panel, Performance and
Maintenance, Power Options. At Power
Schemes tab, you can select the time for Turn
off hard disks.
This feature automatically shuts down the system
in Standby Mode or Hibernation Mode when
there is no input or hardware access for a time
specified. To specify the time, click start, Control
Panel, Performance and Maintenance, Power
Options. At Power Schemes tab, you can
select the time for System standby or System
hibernates.
A microprocessor in the computer's intelligent
power supply detects the battery's charge and
calculates the remaining battery capacity. It also
protects electronic components from abnormal
conditions, such as voltage overload from an
AC adaptor. To monitor remaining battery
capacity, click start, Control Panel,
Performance and Maintenance, Power
Options, and Power Meter tab.
This feature lets you save battery power. To
specify the power save mode click start, Control
Panel, Performance and Maintenance, Power
Options. At Power schemes tab, you can
select the mode for Power schemes.
Introduction
1-9