Toshiba TDP-S2 User Manual page 38

M a i n t e n
WARNING: Be extremely careful
when removing the lamp module.
In the unlikely event that the bulb
ruptures, please contact your
Toshiba dealer, since small glass
fragments may be generated. The
lamp module is designed to
contain these fragments, but use
caution when removing the lamp
module.
CAUTION: Never operate the
projector with the lamp door open
or removed. This disrupts the air
flow and causes the projector to
overheat.
34
a n c e &
3 Invert the projector on a soft flat surface, then insert a small
screwdriver or other flat object into the tabs on the lamp mod-
ule door (Figure 21) and gently pry the door up.
F 21
IGURE
Removing the lamp door
4 Pull the lamp door up and remove it.
5 Loosen the two non-removable screws on the outside of the
module (Figure 22).
F 22
IGURE
Loosening the screws on the lamp module
T r o u b l e s h o o t i n g