Operation - Dimplex EBQ Owner's Manual

OPERATING GUIDE TO YOUR EBQ™ ELECTRIC GRILL
Electrical Requirements
Plug your EBQ™ electric grill into a Ground Fault Interrupt (GFI) outdoor outlet or a circuit
protected by a ground fault breaker with a rating of 15 amps, 120 volts.
A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be
required if, after installation, the circuit breaker trips or the fuse blows on a regular basis when
the electric grill is operating. Additional appliances on the same circuit may exceed the
current rating of the circuit breaker.
Temperature Control
To turn the EBQ™ electric grill on and to adjust the temperature to your individual require-
ments, turn the temperature control knob clockwise until the desired cooking temperature is
reached. To turn the EBQ™ off turn the temperature control knob fully counter clock wise until
the power indicator light is off.
Power Indicator
Light
Front Tray
Lift the tray upwards as shown until it reaches it's highest point. Position the tray level and
push down until it locks into place. To lower the tray, lift up and rotate down.
Step 1
Front Tray
4
5
3
6
2
7
1
Temperature
Control
Step 2
Front Tray
6