Seagate Pulsar.2 ST400FM0052 Product Manual page 43

Bit Word 84
0 SMART error logging is supported
1 SMART self-test is supported
2 Media serial number is supported
3 Media Card Pass Through Command feature set is supported
4 Streaming feature set is supported
5 GPL feature set is supported
6 WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands are supported
7 Obsolete
8 64-bit World wide name is supported
9-10 Obsolete
11-12 Reserved for TLC
13 IDLE IMMEDIATE command with UNLOAD feature is supported
14 Shall be set to one
15 Shall be cleared to zero
Bit Word 85
9 DEVICE RESET command is not supported
10 HPA feature set is supported
11 Obsolete
12 WRITE BUFFER command is supported
13 READ BUFFER command is supported
14 NOP command is supported
15 Obsolete
Bit Word 86
0 DOWNLOAD MICROCODE command is supported
1 Obsolete
2 CFA feature set is supported
6 SET FEATURES subcommand is required to spin-up after power-up
10 The 48-bit Address features set is supported
11 The DCO feature set is supported
12 FLUSH CACHE command supported
13 FLUSH CACHE EXT command supported
15 Words 119..120 are valid
Bit Word 87
0 SMART error logging is supported
1 SMART self-test supported
3 The Media Card Pass Through Command feature set is supported
5 The GPL feature set is supported
Pulsar.2 Product Manual, Rev. B 37