Kenwood R-K731 Instruction Manual page 31

• RPage XX
CD Repeat Playback ModeR P.29
Related Related Related
• RPage XX
Information Information Information
2 2
Press the [A ] or [B ] key to select the track or fi le you
want to listen to.
CD
When Track 10 is selected as
program track 1.
You can also use number keys to select the fi le.
If you enter the wrong information, press the [CLEAR] key before you
proceed to step 3. Then enter the information again.
Proceed to step 3 within 20 seconds after selecting a track or fi le.
3 3
Press the [ENTER] key.
4 4
To select two or more tracks, repeat steps 2 and 3
), or steps 1- 2 to 3 (
( CD
You can select up to 30 tracks. If you attempt to select more tracks, the
"Program Full" message is displayed.
5 5
Press the [CDE] key to begin playback.
To cancel program mode
Stop playback and press the [P.MODE] key so that "PGM" is no lon-
ger displayed.
To remove a track from a program
Stop playback and then press the [CLEAR] key. Each time you press
the key, the last programmed track is cleared.
To add a track to the end of the program
If you are already playing a CD, stop playback and carry out steps 2
) or steps 1- 2 to 3 (
and 3 ( CD
If you turn the system off , switch to another input source or remove the
CD for which program playback is set, the information in the specifi ed
program is erased.
MP3/WMA/AAC
When folder number 5 and fi le number 58 are
selected.
MP3/WMA/AAC ).
MP3/WMA/AAC ).
CD CD
31
English English