Technical Specifications - Harman Kardon 660 Owner's Manual

TECHNICAL SPECIFICATIONS

Audio Section
Stereo Mode, Continuous Average Power (FTC)
AVR 760: 100 Watts per channel, 20Hz–20kHz, @ <0.07% THD, both
channels driven into 8 ohms
AVR 660: 85 Watts per channel, 20Hz–20kHz, @ <0.07% THD, both
channels driven into 8 ohms
Seven-Channel Surround Modes
Power per Individual Channel for AVR 760/660
Front L & R channels:
85/75 Watts per channel @ <0.07% THD, 20Hz–20kHz into 8 ohms
Center channel:
85/75 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms
Surround (L & R Side, L & R Back) channels:
85/75 Watts per channel @ <0.07% THD, 20Hz–20kHz into 8 ohms
Input Sensitivity/Impedance
Linear (High-Level)
Signal-to-Noise Ratio (IHF-A)
Surround System Adjacent Channel Separation
Pro Logic® I/II
Dolby® Digital (AC-3)
DTS®
Frequency Response
@ 1W (+0dB, –3dB)
High Instantaneous Current Capability (HCC)
AVR 660
AVR 760
Transient Intermodulation
Distortion (TIM)
Slew Rate
FM Tuner Section
Frequency Range
Usable Sensitivity
Signal-to-Noise Ratio
Distortion
Stereo Separation
Please register your AVR 760/AVR 660 at www.harmankardon.com.
NOTE: You'll need the product's serial number. At the same time, you can choose to be notified about new products and/or special promotions.
40
200mV/47k ohms
100dB
40dB
55dB
55dB
10Hz –130kHz
±50 Amps
±60 Amps
Unmeasurable
40V/µsec
87.5–108.0MHz
IHF 1.3µV/13.2dBf
Mono/Stereo 70/68dB
Mono/Stereo 0.2/0.3%
40dB @ 1kHz
Selectivity
Image Rejection
IF Rejection
AM Tuner Section
Frequency Range
Signal-to-Noise Ratio
Usable Sensitivity
Distortion
Selectivity
Video Section
Television Format
Input Level/Impedance
Output Level/Impedance
Video Frequency Response
(Composite and S-Video)
Video Frequency Response
(Component Video)
HDMI™
General
Power Requirement
Power Consumption
Stand-by consumption
Dimensions
Width
Height
Depth
Weight
AVR 660
AVR 760
Depth measurement includes knobs, buttons and terminal connections.
Height measurement includes feet and chassis.
Features, specifications and appearance are subject to change without notice.
±400kHz, 70dB
80dB
90dB
520–1720kHz
45dB
Loop 500µV
1kHz, 50% Mod 0.8%
±10kHz, 30dB
PAL
1Vp-p/75 ohms
1Vp-p/75 ohms
10Hz–8MHz (–3dB)
10Hz–100MHz (–3dB)
Version 1.3a with 10-bit Deep Color
AC 230V/50Hz
170W idle, 1220W maximum
(7 channels driven, both models)
AVR 760: 3,1W, AVR 660: 2,7W
(Product) (Shipping)
440mm 520mm
165mm 280mm
435mm 580mm
(Product) (Shipping)
19kg (42 lb) 22.3kg (49 lb)
20kg (44 lb) 23.3kg (51 lb)