Swann ST56 Installation Manual

READ THIS FIRST
Swann ST56 USB
Now you can discover the Internet using the latest V.90 technology at speeds up to 56k.
PACKAGE CONTENTS:
• Swann ST56 USB modem
• Swann NetTools CD
• RJ-11 Phone Cable
• USB Cable (A-B)
For detailed instructions and more info please refer to the User's Guide included with the modem.
Step 1: Install the drivers
Make sure all other programs are closed, and click on the Swann ST56 USB driver installation icon that suits your particular operating system.
A new window will open prompting you with the options to download the file, or run this program from its current location. Select run from current location and
click ok.
You may get a warning that the Authenticode Signature is not found. You must click yes to continue with the installation. Please note that all files have been
scanned with the latest version of Computer Associates VET antivirus program.
Once you have clicked yes, another window will inform you that you are about to install the Swann ST56 USB modem, click "install"to continue.
You will now see the Licence agreement window open. Read this carefully, and then click "I agree" to continue with the installation.
The necessary drivers will now be copied to your systems hard disk, into the C:\modem folder that the installer creates automatically. This is where Microsoft
®
Windows will need to be directed when asked for a driver disk, or a disk from the manufacturer. Once this is done your modem will be detected and identified
®
automatically by Microsoft Windows and also added to the list of manufacturers that you can select from. You will then need to direct your New Hardware
Wizard to this location when prompted. You will also see a shortcut on your Start Menu to uninstall the drivers should the need arise.
You can also install the modem by simply plugging it in to your USB port as described in step 2 below, and when asked for the driver location, selecting the
option of specify location and entering this path. (X represents your CD-ROM drive letter) x:\Drivers\ST56USB\Win9x or x:\Drivers\ST56USB\WinME,
x:\Drivers\ST56USB\Win2k or x:\Drivers\ST56USB\WinXP
method will install the necessary files to install your modem.
® ®
Microsoft Windows 2000 and XP users may receive a warning regarding the lack of a Digital Signature, or that the device has not been Logo Tested. Swann
modems are not digitally signed, nor tested by Microsoft, so you must click Continue Anyway or Yes to complete the installation. Swann modems are
extensively tested with all versions of Windows, and drivers are constantly updated to ensure compatibility.
It is not necessary to shut down your computer to install a USB device.
Once you have completed the driver installation, you can then follow step 2 on the page below.
Installation Guide
Thank you for purchasing a Swann ST56 USB modem.
®
, depending on which version of Microsoft Windows you have, and clicking OK to proceed. Either
MINIMUM SYSTEM REQUIREMENTS:
• Pentium 200MMX or faster processor
• 32MB Ram
® ®
• Microsoft Windows 98 or higher
® ®
®