Menu Options - Hunter 42122 Owner's Manual

Under your menu options you have the ability to reset your filter counter,
span settings, and temperature measurement. After making changes
to each menu option, the thermostat will show "Updated!", save your
changes, and move you back to the home screen.
To access these options:
1. Press the
2. Once in the menu options list, use the
the menu items. The
item. To escape menu options, select a menu item by pressing
then press
3. RESET FILTER: If the filter indicator is flashing on the home screen
you can reset it here. Use the
press
screen.
4. SPAN 1: The next menu option is to set your thermostats primary
span. Use the
Press
screen. The span setting regulates when and how long your system
will run. The span has been set at the factory to 2 which will allow
the system to turn on1
and run for 1
16
button.
again.
. The screen will flash "Updated!" and return to the home
or buttons to adjust between 1, 2, or, 3 degrees.
, the screen will flash "Updated!" and return to the home
F (.05
O
F (.05 C) above or below the set temperature.
O O
44047-01 • 06/18/2012

Menu Options

or
button will take you into the selected menu
or buttons to select "Filter" and
C) above or below the set temperature
O
buttons to scroll through
,