Adjusting The Voice Sync Level For Recording - Olympus LS-5 Instructions Manual

[HIGH]:
This is a highly sensitive mode which can
record surrounding noises.
[LOW]:
This is the standard level of microphone
sensitivity. Select this mode for cases
where the volume of the source sound is
high, such as a band performance.
Note
2
• When you would like to clearly record a
speaker's voice, set the recorder to [LOW] and
hold its built-in stereo microphone close to the
speaker's mouth (5-10 cm) before recording.

Adjusting the voice sync level for
recording
Voice sync recording allows you to start
recording when voice louder than the
voice sync level (detection level) is de-
tected, and automatically stop recording
when the voice becomes quiet. When
voice sync recording is on (
voice is below the voice sync level (detec-
tion level) for longer than the specified
detection time, the recorder stops.
1
Select the recording folder (☞ P.19 to
P.21).
How to change folders:
1 Pressing the LIST button at the file display
while stopped will return you back one layer
above.
Pressing the LIST button repeatedly will
bring you to the folder list display.
2 Pressing button 2 or 3 at the folder list
display will select the folders for voice
recordings.
• Newly recorded audio will be saved as the
last file in the selected folder.
Recording
P.44) and the
☞
REC s button
STOP 4 button
9 0 button