Yamaha F6D Ower's Manual page 77

2. Remove the start-in-gear protection ca-
ble from the starter, if equipped.
1. Start-in-gear protection cable
3. Remove the starter/flywheel cover after
removing the bolt(s).
4. Prepare the engine for starting. For fur-
ther information, see page 29. Be sure
the engine is in neutral and that the en-
gine stop switch lanyard lock plate is at-
tached to the engine stop switch. The
main switch must be "
equipped.
5. If equipped the choke knob, pull out it
when the engine is cold. After the engine
starts, gradually return the choke knob to
its home position as the engine warms
up.
6. Insert the knotted end of the emergency
starter rope into the notch in the flywheel
rotor and wind the rope several turns
around the flywheel clockwise.
7. Give a strong pull straight out to crank
" (on), if
and start the engine. Repeat if neces-
sary.
Trouble Recovery
ON
OFF
ZMU01880
71