Sharp CD-DH790NH Operation Manual page 30

Timer and sleep operation (Remote control only) (continued)
12
When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every day. It will
continue until the daily timer setting is cancelled.
Cancel the daily timer when it is not in use.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN socket,
select "USB" or "AUDIO IN" in step 8.
● This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
"Cancelling the timer setting" of this page.
Checking the timer setting:
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
3
Within 10 seconds, press the
select "TIMER CALL", and press the MEMORY button.
Cancelling the timer setting:
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
3
Within 10 seconds, press the
select "TIMER OFF", and press the MEMORY button.
Timer will be cancelled (the setting will not be
cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
3
Within 10 seconds, press the
select "TIMER ON", and press the MEMORY button.
4
Press the ON/STAND-BY button to enter the power
stand-by mode.
■ Sleep operation
The radio, compact disc, iPod and USB can all be turned
off automatically.
1
2
3
4
5
To confirm the remaining sleep time:
1
To cancel the sleep operation:
or button to
Press the ON/STAND-BY button whilst "SLEEP" is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
or button to
1
2
■ To use timer and sleep operation together
or button to
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
or button to
wake up to CD in the next morning.
1
2
Sleep timer
setting
or button to
or button to
E-21
Play back the desired sound source.
Press the SLEEP button.
Within 10 seconds, press the SLEEP button repeatedly
to select the time.
10 20 30
"SLEEP" will appear.
The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
Whilst "SLEEP" is indicated, press the SLEEP button.
Whilst "SLEEP" is indicated, press the SLEEP button.
Within 10 seconds, press the SLEEP button repeatedly
to select "SLEEP 00".
Set the sleep time (see above, steps 1 - 5).
Whilst the sleep timer is set, set the timer playback
(steps 2 - 9, page 20).
Timer playback
setting
90 minutes
Sleep operation will
automatically stop
....... 80 90
End
time
Desired time
Timer playback
start time