Lubricant Specifications - Ford 2004 04- Mustang Owner's Manual

Maintenance and Specifications
Friction Modifier XL-3 or equivalent meeting Ford
specification EST-M2C118–A for complete refill of
Traction-Lok axles.
3
Ensure the correct automatic transmission fluid is
used. Transmission fluid requirements are indicated
on the dipstick or on the dipstick handle. MERCON
and MERCON V are not interchangeable. DO NOT
mix MERCON and MERCON V. Refer to your
Scheduled Maintenace Guide to determine the
correct service interval.
4
Indicates only approximate dry-fill capacity. Some
applications may vary based on cooler size and if
equipped with an in-tank cooler. The amount of
transmission fluid and fluid level should be set by
the indication on the dipstick's normal operating
range.
5
Service refill capacity is determined by filling the
transmission to the bottom of the filler hole with the
vehicle on a level surface.
6
Use of synthetic or synthetic blend motor oil is not
mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C153–H
and the API Certification mark.

LUBRICANT SPECIFICATIONS

Item Ford part
name
Brake fluid Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
Door Silicone
weatherstrips Lubricant
2004 04- Mustang (mus)
Owners Guide (post-2002-fmt)
USA English (fus)
Ford part Ford
number specification
PM-1 ESA-M6C25-A
and DOT 3
XL-6 ESR-M13P4-A
223