Siemens Gigaset C470 User Manual page 46

Call charges are not displayed.
1. Your network provider does not support
this feature.
2. There are no metering pulses.
¥
Ask your network provider to transmit
the metering pulses.
The other party cannot hear you.
u
You have pressed the
set is "muted".
¥
Activate the microphone again (page 16).
The number of the caller is not displayed
despite CLIP.
Calling Line Identification is not enabled.
¥
The caller should ask the network provider
to release Calling Line Identification (CLI).
You hear an error tone when keying an
input (a descending tone sequence).
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the user
guide if necessary.
You cannot listen to messages on the net-
work mailbox.
Your phone system is set for dial pulsing.
¥
Set your phone system to touch tone dial-
ling.
(INT) key. The hand-
Appendix
45