Water Tank - Siemens KS6 Series Instructions For Use Manual

Putting The Water In The

Water Tank

1. To open the tank, rotate the knob in the
direction of the arrow as illustrated and
pour the water into the dispenser water
tank.
2. Close the cap by tilting it and putting
one side in first and then the other side
as shown.
3. Place the water tank in the tank holder
inside the refrigerator.
Make sure that the groove on the
connecting part is in position with the
tab. Push the connecting part into the
hole unit it "Clicks ".
Tab
Groove
4. Fix the connecting part in place by
means of the holder ring as shown.
CAUTION
- Do not use anything other than water
including soft drinks,milk and juice.
- Hot water needs to be cooled before
being put in the water tank.
Always use the holder ring to fix the
-
water tank in place to prevent the tank
from moving or getting loose.
Drinking
1. Press the dispenser pad with the glass.
2. The water is released when the
dispenser pad is pressed.
en
11