Yamaha GRIZZLY 125 Owner's Manual page 100

q
1. Oil filler bolt
3. Install the screw and oil filler bolt, and then
tighten them to their specified torques.
Tightening torque:
Screw:
16 Nm (1.6 m0kgf, 11 ft0lbf)
Oil filler bolt:
23 Nm (2.3 m0kgf,17 ft0lbf)
Final transmission oil replacement
1. Place the machine on a level surface.
2. Place a container under the engine.
3. Remove the oil filler bolt and drain bolt to
drain the oil from the final transmission
case.
q
1. Drain bolt
4. Install the drain bolt, and then tighten it to
the specified torque.
Tightening torque:
Drain bolt:
23 Nm (2.3 m0kgf, 17 ft0lbf)
8-8