Securing From Overturning - Sharp Aquos LC-37HV4H Operation Manual

Preparation

Securing from overturning

How to secure from overturning
1
Attach the supplied clamp for securing from
overturning (g2) using the clamp screws.
2
Use a strong cord (commercially available)
to secure to a wall or pillar.
Secure the stand on a platform or the floor.
1
Spread a thick soft cloth over the base area
and place the Display over it with the screen
face down.
2
Attach the supplied clamp band using the
supplied screws to the base of the stand.
3
Lift up the Display, place it on a secure
platform or floor and align the position.
4
Use wooden screws (commercially available)
to secure the metal fixtures to the platform
or floor.
NOTE
The Display is heavy so be sure when placing on a platform strong enough to bear the weight. Also be sure the platform
width and depth is big enough so that the Display cannot be easily overturned.
6
Hook (commercially
available)
Top view
Cord (commercially
available)
Clamps (supplied)
Clamp screws (supplied)
Clamp band (supplied)
Cushion
Clamp band
(supplied)
Be sure to use a
strong cord and
wall hooks. Both
are commercially
available.
Screw (supplied)
Stand
Screw (commercially
available)