Siemens Gigaset SL400 User Manual page 61

Using a handset as a room monitor
Activating the room monitor and
entering the destination number
É
¢ ¢
v
Room Monitor
¤
You can enter data in the following fields:
Activation:
Select On to activate.
Alarm to:
Select Internal or External.
External number: Select the number
from the directory (press display key
or enter it manually.
Internal number: Select display key
¢
§Change§
Select handset or Call All to
call all registered handsets
In idle state, the destination number or
the internal destination number is dis-
played.
Sensitivity:
Select noise level sensitivity (Low or
High).
¤
§Save§
Press to save the settings.
When the room monitor function is acti-
vated, the idle display appears as shown
below:
i V
07:15
INT 1 05 Apr
Á
Room Monitor
0891234567
OFF Options
60
Changing the set destination
number
v
¤
Cancelling/deactivating the room
ö monitor
)
Press the end call key a to cancel the call
when the room monitor is activated.
¢
In idle state, press the display key
§OK§
.
deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites: The phone must support tone
dialling and the room monitor should be set
for an external destination number.
¤
The room monitor function will deactivate
after the call ends. There are no further room
monitor calls. The other room monitor set-
tings on the handset (e.g., no ringtone) will
remain activated until you press the display
key
To reactivate the room function with the
same phone number:
¤
É
¢ ¢
Room Monitor
Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
¢
( page 60).
Accept the call from the room monitor
and press keys 9 ;.
§OFF§
on the handset.
Reactivate and save with
¢
( page 60).
§OFF§
to
§Save§