Table of Contents
Advertisement
Troubleshooting (Continued)
Antenna
Problem
I Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or
appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns
to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct
sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: –20°C to +60°C (–4°F to +140°F))
48
• The reception may be weak.
• The quality of the broadcast may also be bad.
• Make sure the antenna is facing the correct direction.
The picture is
• Make sure the outside antenna has not been disconnected.
not sharp.
The picture
shakes.
• Make sure the antenna is facing the correct direction.
• Broadcast waves may be reflected from adjacent mountains or
The picture has
buildings.
ghosts.
• There may be interference from automobiles, trains, high-voltage
lines, neon lights, etc.
• There may be interference between the antenna cable and power
The picture is
cable. Try positioning them further apart.
spotted.
• Is the unit receiving interference from other devices?
There are
Transmission antennas of radio broadcasting stations and
stripes on the
transmission antennas of amateur radios and cellular phones may
screen or
also cause interference.
colours fade.
• Use the unit as far apart as possible from devices that may cause
possible interference.
Check item
Advertisement
Table of Contents
