Transferring files to your computer (for Windows)
Transferring files using Intelli-studio
Intelli-studio starts automatically when you connect the camera to
your computer with the USB cable.
The battery charges while the camera is connected to a computer with the
USB cable.
1
In Shooting or Playback mode, press [m].
2
Select n
PC Software
3
Turn off the camera.
4
Connect the camera to your computer with the USB
cable.
You must plug the end of the cable with the indicator light ( ) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
On.
Playback/Editing
5
Turn on the camera.
The computer recognizes the camera automatically.
•
If you set the USB option to Select Mode, select Computer from the
pop-up window.
6
Select a folder on your computer to save new files to.
If your camera has no new files, the pop-up window for saving
•
new files will not appear.
7
Select Yes.
New files are transferred to the computer.
•
For Windows Vista and Windows 7, select Run iStudio.exe from the
AutoPlay window.
98