During The Wash Cycle - Siemens Dishwasher Instructions For Use Manual

en
Cover on the detergent dispenser
cannot be closed.
Detergent dispenser overfilled
or mechanism blocked by sticky
detergent residue.
Detergent residue in the detergent
dispenser.
Dispenser was damp when filled.
"check water supply"
lights up.
Tap turned off.
Water supply interrupted.
Supply hose kinked.
Filter in the water supply blocked.
Switch off the appliance and
pull out the mains plug.
Turn off the tap.
Clean filter in the supply hose.
Reconnect power supply.
Turn on the tap.
Switch on the appliance.
Water is left in the appliance
at the end of the programme.
Waste water hose is blocked
or kinked.
Waste water pump blocked,
cover on the waste water pump
is not locked in position
(see Maintenance and Care).
Filters blocked.
The programme has not yet
ended. Wait until programme
ends or implement "Reset"
function.
20
display
12

... during the wash cycle

The "Check water supply" display
flashes rapidly.
12
Water in the safety system.
Switch off the appliance and
pull out the mains plug.
Turn off the tap.
Contact customer service.
Refill indicator for salt
rinse-aid is not lit.
10
Refill indicator/s switched off.
Adequate salt/rinse-aid available.
Refill indicator for special salt
is lit.
No salt.
Refill with salt.
Sensor does not detect salt
tablets.
Use different special salt.
Unusual foam formation
Handwash liquid in the rinse
aid dispenser.
Spilled rinse-aid causes excessive
frothing, therefore please remove
with a cloth.
Appliance stops during the wash
cycle.
Power supply interrupted.
Water supply interrupted.
Knocking/rattling noise during
rinsing
Spray arm is striking utensils.
Utensils not arranged correctly.
Filling valves making striking
noises
Caused by the installation of the
water line and has no effect on the
function of the machine. Remedial
action is not possible.
and/or
11
11