Table of Contents
Advertisement
Specifications
Features
Display
Polarity
Measurement Range
Resolution
Power Supply
Distance to Spot Ratio 8 to 1
Emissivity
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Do not use the Flexible Infrared Thermometer in
2.
damp or wet locations. Don't expose to rain. Keep work area well lighted. Do not use
electrically powered tools in the presence of flammable gases or liquids.
Keep children away. Children must never be allowed in the work area. Do not let
3.
them handle the Flexible Infrared Thermometer.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
Use the right tool for the job. Do not attempt to force a small tool or attachment to
5.
do the work of a larger industrial tool. There are certain applications for which this
tool was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
Dress properly. Protective, electrically nonconductive clothes and nonskid footwear
6.
are recommended when working. Wear restrictive hair covering to contain long hair.
Use eye protection. Always wear ANSI approved impact safety goggles.
7.
For technical questions, please call 1-800-444-3353
SKU 94233
Flexible 14-1/8" Shaft
LCD w/White Backlight,
Auto Data Hold Laser Guide
Automatic (no indication for
positive polarity): Minus (-)
sign for negative polarity
-58°F to 1112°F
(-50°C to 600°C)
(0.1° up to 200°,
1° over 200 °)
9V Battery (included)
Fixed @ .95
Save This Manual
Safety Warnings and Precautions
LASER LIGHT
DO NOT STARE INTO BEAM
Max. Output: 1mW,
Wavelength: 650 nm
CLASS II LASER PRODUCT
This product complies with
21 CFR 1040.10 and 1040.11
CEN-TECH
3491 Mission Oaks Blvd.,
Camarillo, CA, USA, 93011
Manufacture Date: ___________, _______
REV 06g; REV 06i
Page 2
Advertisement
Table of Contents
