Making calls
Making internal calls
Internal calls to other handsets registered to the same base are free of charge.
¤
Open the dial page (
the list or touch All Handsets.
After opening the list, press
Accepting a call
¤
You have the following options:
c
Press
.
¤
Take the handset out of the charger if Auto Answer is activated (
Accepting a call on a Bluetooth headset
¢
Prerequisite: Bluetooth is activated; the Bluetooth headset and the handset are connected
(
page 26).
Only press the talk key on the headset once the headset rings.
For further details about your headset, see the accompanying user guide.
Speaker mode
You can configure various profiles for speaker mode (
¤
If you are going to let someone listen in, you should tell the other party that this is happening.
Activating while dialling
¤
Enter the number, press
Switching between earpiece and speaker mode
During a call, when establishing a connection and when listening to a (network) answering machine:
¤
c
Press
or touch [
¤
Place the handset in the charger during a call:
Press and hold
Switching to mute
If you deactivate the handset microphone during an external call, the other parties cannot hear you,
but you can still hear the other party.
¤
Switch to mute, cancel muting (activate/deactivate microphone):
–
Touch [
Mute].
Security check
The handset detects unsecured connections to the base, where third parties could listen in.
When establishing an external call or during an external call:
¤
Press and hold any position on the status bar.
If Secure connection to base is displayed, the connection is secure.
If No secure connection to base is displayed, you should end the call.
18
¢
¤
page 11).
Touch [
c
to initiate a group call to all handsets.
c
twice.
†
Speaker].
c
while placing the handset in the charger and for a further 2 seconds.
¤
‡
Internal].
If necessary, select the handset from
¢
¢
page 35).
page 34).