Download Print this page

Harbor Freight Tools 91614 Assembly & Operating Instructions

Two burner propane stove

Advertisement

Quick Links

PROPANE STOVE
ASSEMBLY & OPERATING INSTRUCTIONS
FOR YOUR SAFETY
If you smell gas:
1.
Check that the bottle is tightly screwed to
the regulator.
2.
Shut off gas to the appliance.
3.
Extinguish any open flame.
4.
If odor continues, properly dispose of the
propane bottle and use another.
WARNING: For Outdoor Use Only.
Copyright
or any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
TWO BURNER
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
©
2004 by Harbor Freight Tools
91614
FOR YOUR SAFETY
Do not store or use gasoline or other flam-
mable vapors and liquids in the vicinity of this
or any other appliance.
WARNING: Improper installation, adjustment,
alteration, service, or maintenance can cause
injury or property damage. Read the installa-
tion, operating, and maintenance instructions
thoroughly before installing or servicing this
equipment.
®
®
. All rights reserved. No portion of this manual

Advertisement

loading

Summary of Contents for Harbor Freight Tools 91614

  • Page 1 Copyright 2004 by Harbor Freight Tools or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 91614 FOR YOUR SAFETY...
  • Page 2 THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model__________ Serial No.___________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.
  • Page 3 Risk of Burns-Propane Stove Gets Very Hot During Use. Do not attempt to move the Propane Stove while it is in operation. Turn it off and wait one-half hour until it cools down before moving. Do not touch the Burner and Fuel Jet Assembly while the Propane Stove is lit.
  • Page 4 Stove and the items to be heated. Raise the Cover (1), then raise the Side Shields (2) on both sides of the Stove. Insert the tabs on the Cover (1) through the hole in the side of the Side Shields (2). Raise each Side Shield (2) completely into place so that the tab locks into place at the end of the groove.
  • Page 5 Flip the Latches (6) around to the top so that they hold the Cover closed. When unpacking your Two Burner Propane Stove, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353.
  • Page 6 TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. For technical questions, please call 1-800-444-3353. SKU 91614 Page...