Network - Siemens MT50 User Manual

64

Network

¢ ¢
§Menu§ Setup
¢
Select a function:
Line
This function is only displayed if it is
supported by the service provider.
Two independent phone numbers
must be registered on the phone.
Select
Select the currently used phone
number.
=
Display the active phone
number.
Note
Settings for phone numbers .............. p. 78
Block line
(Phone code protected)
You may limit usage to one phone
number.
Configuration
Network info
The list of GSM networks currently
available is displayed.
Indicates forbidden serv-
k
ice providers (depending
on SIM card).
Network
~
Setup
¢
§Menu§
¢
¢
Choose network
The network search is restarted. This
is useful if you are not on your home
network or want to register on a
different network. The network info
list is rebuilt when
Auto network
Activate or deactivate, see also
"Choose
If "Automatic network" is activated,
the next network is dialled in the or-
der of your "preferred service provid-
ers". Otherwise a different network
can be selected manually from the
list of available GSM networks.
Net operator
A list of all known GSM networks
worldwide is displayed with the
current codes.
Band selection
Select either GSM 900 or
GSM 1800.
¢
Setup Network
Configuration
Select a function:
Auto network
network" above.
is set.
~