Mercedes-Benz S 600 Operator's Manual page 116

Turn Signal, Parking, Side Marker
and Standing Lamp (2357 NA
[28.5/8.3 W/30/2.2 cp bulb)
Open hood.
Squeeze latch (1) together and lift
complete lamp assembly out to front of
vehicle. Twist bulb socket (2)
counterclockwise and pull out. Push
bulb into socket, turn counterclockwise
and remove.
Insert new bulb in socket, push in and
twist clockwise. Reinstall bulb socket.
Reinstall lamp assembly by sliding tabs
(3) into guides (4) until properly
seated.
1 Latch for turn signal, parking,
side marker and standing lamp
assembly
2 Bulb socket for turn signal,
parking, side marker and
standing lamp
3 Tab
4 Guide
116