Maintenance/Servicing; Cleaning And Maintenance; Ntsc/Pal Output Select - Bunker Hill Security 67139 Set Up And Operating Instructions Manual

maintenance/servicing

Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
FrOm accidental
OperatiOn:
unplug the unit from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
tO prevent seriOus
injurY FrOm unit Failure:
do not use damaged
equipment. if abnormal noise
occurs, have the problem
corrected before further use.

cleaning and maintenance

BEFORE EACH USE, inspect the
general condition of the unit, includ-
ing connections, wiring and cameras.
Check for loose or damaged hard-
ware, damaged electrical wiring, and
any other condition that may affect its
safe operation.
warning! if the supply cord of
this dvr is damaged, it must be
replaced only by a qualified ser-
vice technician.
SKU 67139
tO prevent
seriOus injurY
For technical questions, please call 1-800-444-3353.

ntsc/pal Output select

This unit is set to NTSC video format. It
can be changed to PAL by changing the
jumper JS1 setting. This change must be
made by a qualified technician. To make
this adjustment:
1. Open the cover.
2. Slide the switch to NTSC or PAL as
needed for your system.
3. Replace and secure the cover.
Page 35