Subnet Mask - Bunker Hill Security 67139 Set Up And Operating Instructions Manual

If your modem/router supports DHCP
functions, you can use DHCP mode.
If you set your IP Allocation to DHCP
mode you do not set the IP Address,
Subnet Mask or Gateway.
If you set your IP Allocation to Static
mode, you will need to setup the fol-
lowing IP Address, Subnet Mask and
Gateway settings manually.
ip address
Set up your IP setting according to
the actual network connected to the
DVR. Consult your modem/router for
your IP address.
To adjust the setting:
3. Press [ ] or [
number to change.
4. Press the arrow keys [
change the number.
5. Press [SEL] to accept the change.
6. Press STOP
7. Press REC
8. Press [MENU] to save and return to
previous menu.
note: Before using your web browser to
view the program over the network,
SKU 67139
] to move to the
, ] to
to delete a number.
to insert a number.
For technical questions, please call 1-800-444-3353.
you may need to change the security
settings and enable all ActiveX func-
tions.

subnet mask

The Subnet Mask is the identifying
number used to determine where an
IP address belongs on a local area
network. Consult your modem/router
for your LAN's subnet mask.
Follow the same steps as for chang-
ing the IP Address numbers to make
any changes to the Subnet Mask.
gatewaY
Set this number to the gateway set by
your modem/router, provided by your
internet service provider.
Page 28