Sensor Record Time - Bunker Hill Security 67139 Set Up And Operating Instructions Manual

This menu also has the sub-menu:
"Motion Detector Setup", for setting
motion detection options.

sensOr recOrd time

1. In the Sensor Setup sub-menu, press
the up or down arrow keys [ ,
select "Sensor Record Time".
2. Press [SEL] to increase, or STOP
to decrease, the number of seconds
to record once the sensor is activat-
ed. The recording time can be set to
5, 10, 15, 20, 25 or 30 seconds.
alarm On time
1. In the Sensor Setup sub-menu, press
the up or down arrow keys [ ,
select "Alarm on Time".
2. Press [SEL] to switch between the
following options:
a. CONT - The alarm will sound once
the motion sensor is activated and
will continue until any key is pressed
on the DVR or remote.
b. OFF - No alarm will sound.
c. # - The alarm will sound for the num-
ber of seconds indicated. The alarm
can be set to 5, 10, 15, 20, 25 or 30
seconds. Press [SEL] to increase, or
[STOP] to decrease the number.
SKU 67139
] to
] to
For technical questions, please call 1-800-444-3353.
mOtiOn detectOr setup
motion detector setup
CH1 ON
CH2 ON
CH3 ON
CH4 ON
( )MOVE ( SEL)SELECT (MENU)ESC
This sub-menu allows you to set the
motion detection options for each
camera.
1. In the Sensor Setup sub-menu, press
the up or down arrow keys [ ,
select "Motion Detector Setup".
2. Press [SEL] to enter the Motion De-
tector Setup sub-menu.
3. Press the arrow keys [
] to move between the channels
and the options for each. Press [SEL]
button to change the settings for each
option. The options and settings are:
a. On/Off - Use the [SEL] button to
toggle between enabling (On) or dis-
abling (Off) motion detection record-
ing for each channel.
b. Level - Use the [SEL] button to set
the sensitivity level from 1 (lowest) to
3 (highest).
c. Area - Use the [SEL] button to enter
this sub-menu.
Level 2 Area
Level 2 Area
Level 2 Area
Level 2 Area
] to
, , and
Page 21