Specific Safety Rules; Extension Cords - Bunker Hill Security 95914 Set Up And Operating Instructions Manual

5. Check for misalignment or binding
of moving parts, breakage of
parts, and any other condition
that may affect this product's
operation. If damaged, have the
product serviced before using.
Many accidents are caused by poorly
maintained products.
6. Use only accessories that are
recommended by the manufacturer
for your model. Accessories that
may be suitable for one product may
become hazardous when used on
another product.
SERVICE
product service must be
1.
performed only by qualified repair
personnel. Service or maintenance
performed by unqualified personnel
could result in a risk of injury.
2. When servicing a product, use
only identical replacement
parts. Follow instructions in the
"Inspection, Maintenance, And
Cleaning" section of this manual.
Use of unauthorized parts or failure
to follow maintenance instructions
may create a risk of electric shock or
injury.

SpECIFIC SAFETY RULES

1. Maintain labels and nameplates
on the this product. These carry
important information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
2. Maintain a safe product use
environment. Make sure the AC/
DC Adapter for this product is kept
clean and dry. Do not plug the AC/
SKU 95914 For technical questions, please call 1-800-444-3353.
DC Adapter into an electrical outlet in
a damp or wet location.
3. People with pacemakers should
consult their physician(s) before
use. Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference or
pacemaker failure.
4. WARNING: Handling the cord on
this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and
birth defects or other reproductive
harm. Wash hands after handling.
(California Health & Safety Code §
25249.5, et seq.)

Extension Cords

1. As the distance from the supply
outlet increases, you must use a
heavier gauge extension cord. Using
extension cords with inadequately
sized wire causes a serious drop in
voltage, resulting in loss of power and
possible tool damage.
(See Table A.)
2. The smaller the gauge number of the
wire, the greater the capacity of the
cord. For example, a 14 gauge cord
can carry a higher current than a 16
gauge cord. (See Table A.)
3. When using more than one extension
cord to make up the total length,
make sure each cord contains at
least the minimum wire size required.
(See Table A.)
4. If you are using one extension cord
for more than one tool, add the
nameplate amperes and use the sum
to determine the required minimum
cord size. (See Table A.)
Page 4